Tweet
My starboard ballast valve in the engine bay doesn't seem to seal correctly. When I turn it to the closed position, it wedges open slightly allowing the ballast to fill while under way. I tried tying it to the off position, and even when it's in the closed position, the starboard ballast still fills up on it's own. Has anyone done this fix on their own? I've found a little bit of info using the search function, but I haven't found enough details to take this task on yet. Thanks in advance.
-
-
Changed all three of mine in my 03. If yours are the same I have an extra 2 valves I got from nautique I think.Current Correct Craft Boat
[URL="http://tapatalk.imageshack.com/v2/15/02/05/1e6128564805861d2625d7b7f8efd2f1.jpg"]2015 SANTE 210[/URL]
Correct Craft Boats Owned
[URL="http://www.planetnautique.com/vb5/attachment.php?attachmentid=17771&d=1340117700"]2012 SANTE 210 (Boatmate Trailer)[/URL]
[URL="http://www.planetnautique.com/vb5/attachment.php?attachmentid=14107&d=1313460568"]2003 SANTE 210 (Dorsey Trailer)[/URL]
[URL="http://www.planetnautique.com/vb3/attachment.php?attachmentid=14108&d=1313461675"]2007 SANTE 210 (Magnum Trailer)[/URL]
Comment