I've been a long time reader of the forum, there is some great info here
i have a 2000 SN with a gt40, I had stalling issues, rich mixture smell, and surging. I found a bad safety switch(stalling) I measured the ECT and AIR temp switch, these were out of spec so I replaced both, measured fuel pressure, 35 at idle and 40 at WOT, I also replaced my anti siphon valve, went out today, the boat refuses to pull more than 3600 rpm, it starts surging on the accel up to WOT, what should my fuel pressure be measured a the FCC, I didn't measure here, any ideas on measuring low pump volume?
thanks for any help
i have a 2000 SN with a gt40, I had stalling issues, rich mixture smell, and surging. I found a bad safety switch(stalling) I measured the ECT and AIR temp switch, these were out of spec so I replaced both, measured fuel pressure, 35 at idle and 40 at WOT, I also replaced my anti siphon valve, went out today, the boat refuses to pull more than 3600 rpm, it starts surging on the accel up to WOT, what should my fuel pressure be measured a the FCC, I didn't measure here, any ideas on measuring low pump volume?
thanks for any help
Comment