Help! 2006 SAN. No power

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • jkallen21
    Senior Member of PLANETNAUTIQUE
    • Jan 2013
    • 399

    • United States

    • 2006 Super Air 220

    Help! 2006 SAN. No power

    First weekend out with the Fam on the new boat. Found that battery switch was left in "both" all winter. 2 dead batteries. Replaced one battery but I get no power to dash. Nothing. I don't put in the start code, hit start and get nothing. Boat is still on trailer if that makes any difference. I have checked all circuit breakers I can find including 50A on engine. I'm hoping its just something I missed. Under the steering wheel (way under) are two rows of lights(?). None are on. If they are breakers they are not popped.

    Does Horn work without code?
    which battery is 1 and which is 2?
    if I set to "both" an only have 1 battery is that going to work?

    help!
    thanks
  • jmo
    Senior Member of PLANETNAUTIQUE
    • Mar 2006
    • 707

    • MA


    #2
    I would replace both batteries, and then check connections, and the kill switch (on, off, bilge only), and make sure you safety lanyard is still in place. Any of these things can result in no power to the dash. The horn will only work if the dash has power.
    Last edited by jmo; 05-26-2013, 05:33 PM.
    2018 Ski Nautique 200 TE, H6
    - 2006 Ski Nautique 196 LE, Excalibur 330
    - 2001 Super Sport Nautique, GT40

    Comment

    • jmo
      Senior Member of PLANETNAUTIQUE
      • Mar 2006
      • 707

      • MA


      #3
      And yes, the horn works (provided there is power) without entering the start code on the keypad.
      2018 Ski Nautique 200 TE, H6
      - 2006 Ski Nautique 196 LE, Excalibur 330
      - 2001 Super Sport Nautique, GT40

      Comment

      • jkallen21
        Senior Member of PLANETNAUTIQUE
        • Jan 2013
        • 399

        • United States

        • 2006 Super Air 220

        #4
        It was that bildge switch. What's that thing for (besides ruining my Sunday)?
        thank you SO much.
        Incidentally, my horn is broken and does not work made things worse.

        Comment

        • AirTool
          1,000 Post Club Member
          • Sep 2007
          • 4049

          • Katy, Texas


          #5
          Originally posted by jkallen21 View Post
          I don't put in the start code, ...
          Can you elaborate on this statement?

          Comment

          Working...
          X