2012 SANTE Bimini top

[lucky7t]

I'm having an issue adjusting the Bimini top so that's above the pylon so we can board when the Bimini is not open. We don't use the Bimini very often but when you open it or try to use it is very hard to put the pins in. I have to practically hang off the front of the Bimini to get the pin in. Then if I adjust it donuts easier when it's closed it covers the pylon.

Any help would be appreciated

[Clibka]

I'm having an issue adjusting the Bimini top so that's above the pylon so we can board when the Bimini is not open. We don't use the Bimini very often but when you open it or try to use it is very hard to put the pins in. I have to practically hang off the front of the Bimini to get the pin in. Then if I adjust it donuts easier when it's closed it covers the pylon.

Any help would be appreciated

same issue here . . . I found that you have to take the cover for the bimini and wrap the straps around the bimini itself before fastening it to the support pole to keep it out of the way of the pylon.

As for setting the thing up . . . N3 is currently drilling mine out slightly to make getting the pins in easier. That is the only solution that makes sense.

[lucky7t]

Hmm that's what I thought. I appreciate the message