Perfect Pass install

[Lakejackson]

I am getting ready to install Perfect Pass Wake Edition on my 2004 Air Nautique
216 with 330 excaliber engine. Any suggestions or helpful hints before I get going?

[196 die hard]

Spend a few more $$ and install ZO.

[BrennanK]

Spend a few more $$ and install ZO.

That would be pretty expensive to convert to drive by wire which Zero Off requires.

Not to mention that the new versions of Perfect Pass are really quite good (ZBox). For wake boarding GPS based Perfect Pass is more then sufficient.


Really the hardest part was getting the wire from the helm to the engine. I used a fish tape and several hours of poking around and got it. I also pulled a pull rope with my Perfect Pass wires for later use if needed.
The install is pretty straight forward and Perfect Pass is really good about helping and answering questions.

[east tx skier]

That would be pretty expensive to convert to drive by wire which Zero Off requires.

Not to mention that the new versions of Perfect Pass are really quite good (ZBox). For wake boarding GPS based Perfect Pass is more then sufficient.


Really the hardest part was getting the wire from the helm to the engine. I used a fish tape and several hours of poking around and got it. I also pulled a pull rope with my Perfect Pass wires for later use if needed.
The install is pretty straight forward and Perfect Pass is really good about helping and answering questions.

This ^^^. From start to finish.