After I turned on the master switch and punched in the three digit code the light at the right of the panel came on as usual. But when I then pushed the start button the red light on the left side of the panel and the warning light above came on for only an instant and then the system shut down (all lights out) like I had turned off the master switch. I then had to enter the code to get the light on the right side of the panel to come on again. I thought the battery might be low so I put the charger on it. It indicated fully charged but I left the charger on it for a couple of hours anyway. I tried again with the same result. Before I start tearing things apart I was hoping someone might have experienced something similar in the past that could point me to the solution.
Thanks
Rockem.
Thanks
Rockem.
Comment