While pulling into the dock my buddy went to put it in reverse after being in nuetral and it felt to him like it did not catch, he had to pull it almost horizontal to get it to catch. Tried it both ways and it was almost like the nuetral button was on, but we had just driven off the lake and had done nothing like that.
So he worked it a bit and it caught again. I checked the throttle later and it seemed a bit loose (mechanically loose), like you could wiggle the whole mechanism. It was clicking into forward and reverse though.
I can only see one center screw on it from the back and the one on the front. I will tighten those a bit, but was wondering if anyone had a similar thing happen, it's an 02 super air. Would hate to repeat that situation as we almost collided into a pontoon boat without reverse.
Thanks in advance.
So he worked it a bit and it caught again. I checked the throttle later and it seemed a bit loose (mechanically loose), like you could wiggle the whole mechanism. It was clicking into forward and reverse though.
I can only see one center screw on it from the back and the one on the front. I will tighten those a bit, but was wondering if anyone had a similar thing happen, it's an 02 super air. Would hate to repeat that situation as we almost collided into a pontoon boat without reverse.
Thanks in advance.
Comment