Tweet
Boat is a 2004 SV211TE, with a ZR6, so fresh water cooling.
First quesiton, based on tracing lines, etc, it looks like the heater is hosed off the coolant side of things, not raw water, right? If so, then I would assume I don't need to drain the heater for the winter, right?
I need to change the tranny fluid, but this is my first inboard... so, there is a separate PCM 1:1 transmission and then a Walter V-Drive? So I am assuming I need to change both?
I can see the Walter V-drive and have drained the water from that, and can see where I would drain and re-fill the oil. It says SAE 30.
But the PCM, seems to just be a big round connector. I can see the "shift level" which I assume moves forward or reverse, and what looks like the oil pressure sender, but feeling around I can't find a drain/fill plug. I couldn't see anything in my manual, but am assuming there is something separate as it has a plate on it that says use Dexron III and "check oil daily"... anybody have a good pic or diagram?
First quesiton, based on tracing lines, etc, it looks like the heater is hosed off the coolant side of things, not raw water, right? If so, then I would assume I don't need to drain the heater for the winter, right?
I need to change the tranny fluid, but this is my first inboard... so, there is a separate PCM 1:1 transmission and then a Walter V-Drive? So I am assuming I need to change both?
I can see the Walter V-drive and have drained the water from that, and can see where I would drain and re-fill the oil. It says SAE 30.
But the PCM, seems to just be a big round connector. I can see the "shift level" which I assume moves forward or reverse, and what looks like the oil pressure sender, but feeling around I can't find a drain/fill plug. I couldn't see anything in my manual, but am assuming there is something separate as it has a plate on it that says use Dexron III and "check oil daily"... anybody have a good pic or diagram?
Comment