New Gauges for 2002 SANTE

[fyrhog]

I want to replace my Gauges ( oil press,temp,fuel & amp),,, can I get them with plugin connectors or do I have to cut and splice wires to hook them up. I did the RPM Tach replace and Star Gazer already and that was all straight forward install.

Thanks,Ron

[Brichter14]

I would like info on this also because i see new gauges in my future

[fyrhog]

Well standby I just ordered my new gauges and Im not sure how they connect up,,,,Ill let you know.
If they arnt plug in I probably wont install them.

[NautiqueJeff]

Here are the instructions for mounting these gauges. This should answer all of your questions.

[fyrhog]

Thanks Jeff,,,I do have my MPH & Tach gauges installed and that went fine. Its the Gen,Oil,Temp and volts gauges Im referring to,,,I will have them in a few days to report back. FYI: Also upgraded to Star Gazer and that went well to.

Ron

[fyrhog]

Got my new Faria gauges (Gen,Oil, Fuel & Volts) and they look great. The problem is they have post connectors and I would like deutcsh plug in type (if they make those). I really dont want to cut,splice wires to make these gauges work. So if anyone has replaced these gauges please chime in on your install,,,,Thanks guys.
Ron
2002 SANTE

[Brichter14]

Did u get the chesapeake ones? They look nice.

[mnovstel]

These are the Faria gauges I purchased, just have to select the newer replacements. They will plug right in, simple install.
Don't forget the PN discount.

http://www.nautiqueparts.com/temperaturegauge.aspx
http://www.nautiqueparts.com/voltmet...ezel2002-.aspx
http://www.nautiqueparts.com/oilpres...lexvision.aspx
http://www.nautiqueparts.com/fuelgau...lexvision.aspx

[fyrhog]

PN discount ???? Got my new Faria gauges and they look great but I might send them back because they are posts connectors and a lot of work to splice them in with additional wiring. Im looking for the plug in type right now at PN,,,,hope they can help me.

[s_kelley2000]

The discount code for Nautiqueparts/White Lakes is "PND" for 10% off. check out this thread for all of the site discounts:

http://www.planetnautique.com/vb3/sh...stry-Discounts

[fyrhog]

AWWW great Shawn,,,,TY muchly.
Ron

[Rick]

Why don't you get spade connectors to post and mount them then plug them in?

[fyrhog]

Are you talking about a connector that duplicates the female on the existing gauge?? Not sure where I can get that kind of connector and that might workout. I only see dash wiring diagram for 2001 but I think that covers 2002 also. Im waiting to hear from PN to see if they have the plug in gauges,,,,that sure would simplify everything.

[fyrhog]

Connector

This is what I think I need to connect the post style gauges.

[fyrhog]

Has to duplicate this connection