User error bent a fin

[dttheel]

I had the boat too far up in slip and when raising up the boat, the lift bent one of the three fins attached to the hull. It looks like a relatively easy fix...order new fin from NautiqueParts.com, unscrew the bent one and attach the new one. Am I missing something?

[xlair]

No you got it for the most part. Be sure to use some new sealant when putting the fin back on.

[ski4evr]

NP will hook you up with the right sealant. Impact driver was handy getting the tight Phillips screws loose.

[dttheel]

Thanks for the advice, guys. The "job" is done. The screws came out pretty easily, but getting the sealant to let go was by far the hardest part. Ready to go back into the water tomorrow.