Tweet
Over the weekend I got a low power message followed by the sepentine belt and tension pulley coming apart on my 2007 SANTE 210. I thinking that the weekend is shot. But!
My neighbor on the San Bernard river came by and told me to go down to a normal auto parts store for those items. Which was something I didn't.
Checking online, I found that I needed a 62 1/4 by 13/16 inch belt. I went down to the parts store and bought a 62 1/8, a 62 5/8 and a 63 5/8. I also took what was left of the tension pulley and found the exact pulley I needed at an O'Riley's in Lake Jackson TX.
Long story short, the 63 5/8 fit and we were back on the water. I know the electric stuff should only be replace with marine equipment but mechanical stuff should be ok, at least in the short term.
I hope this helps some brothers out there...
My neighbor on the San Bernard river came by and told me to go down to a normal auto parts store for those items. Which was something I didn't.
Checking online, I found that I needed a 62 1/4 by 13/16 inch belt. I went down to the parts store and bought a 62 1/8, a 62 5/8 and a 63 5/8. I also took what was left of the tension pulley and found the exact pulley I needed at an O'Riley's in Lake Jackson TX.
Long story short, the 63 5/8 fit and we were back on the water. I know the electric stuff should only be replace with marine equipment but mechanical stuff should be ok, at least in the short term.
I hope this helps some brothers out there...