Shaft packing nut

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • scott resick
    Senior Member of PLANETNAUTIQUE
    • Jan 2012
    • 532

    • Pittsburgh

    • 2006 196 Limited

    #1

    Shaft packing nut

    I needed to replace the stuffing on my 2006 196. The nut came off nicely but will not go back on. Plenty of thread showing. Even without the packing the nut will not thread back on. Any thoughts?
  • ffmedic74
    Senior Member of PLANETNAUTIQUE
    • Jul 2003
    • 835

    • Lexington, KY


    #2
    Check out the threads. I had an 05 and turned out the threads were cross threaded from the factory or dealership.

    Comment

    • scott resick
      Senior Member of PLANETNAUTIQUE
      • Jan 2012
      • 532

      • Pittsburgh

      • 2006 196 Limited

      #3
      I called Buxton Marine (all the East Coast Dealers were closed @ 5:30 yesterday) They told me to loosen the nuts on the shaft from the tranny. That helped, but I still had to use a pry bar to move the drive shaft around until the nut threaded.

      Comment

      Working...
      X