LINC problem

[josemolino]

Got some water in the batteries so we had to replace them. Since then, LINC screen shows NAUTIQUE but does not move forward to the menus. The engine starts but we cannot use any control/info from the LINC (speed, ballast,..)
We have rebooted by dialing code+stop. Any ideas????

[cmcmechan]

sounds like you had a voltage surge threw the system. Have the dealer try to reload the software. if that dose not work you are probably into a new LINC system

[81nautique]

Sounds like you need to have it reflashed but being in Spain not sure that's as simple as running it down to your dealer. Contact Nautique and see if they can get you the current flash and you can do it yourself.