Help with diagnostic error message

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • iamcdn
    • Mar 2013
    • 337

    • Penticton, Canada

    • 2013 SANTE 210 with NSS

    Help with diagnostic error message

    We are on holidays and received this error through the linc system. Boat initially went into limp mode but returned to normal functioning after turning her off and back on. Any suggestions?




    Sent from my iPhone using Tapatalk
  • ScooterMcgavin
    1,000 Post Club Member
    • Jul 2011
    • 1478

    • Florida

    • 2014 SAN 210 TE

    #2
    Overheat codes. I would check strainer,and raw water inlet under boat for blockage first.
    Sounds like your engine is not getting enough water for cooling
    2009 Super Air Nautique 210 TE
    2006 Super Air Nautique 210 TE
    1989 Sport Nautique

    Comment

    • iamcdn
      • Mar 2013
      • 337

      • Penticton, Canada

      • 2013 SANTE 210 with NSS

      #3
      That is helpful. We have been renting a place in a channel with lots of weeds and a muddy bottom. I will dive under and check. I just changed the impeller so that should be good.


      Sent from my iPhone using Tapatalk

      Comment

      • ScooterMcgavin
        1,000 Post Club Member
        • Jul 2011
        • 1478

        • Florida

        • 2014 SAN 210 TE

        #4
        Any updates? How did the strainer look?
        2009 Super Air Nautique 210 TE
        2006 Super Air Nautique 210 TE
        1989 Sport Nautique

        Comment

        • iamcdn
          • Mar 2013
          • 337

          • Penticton, Canada

          • 2013 SANTE 210 with NSS

          #5
          The strainer looked terrible. Quite clogged. It is clear and we will take her out today and see. Thx


          Sent from my iPhone using Tapatalk

          Comment

          Working...
          X