replacing blower

[dskier]

On a 2012 sport 200V. Does the blower just "push" into the opening on the boat? I don't want to pull to hard if there is connection I am missing. There is a zip tie connecting the hose to the blower on the top but I can't tell/see any clamp or tie at the "bottom". I will send a picture if needed??

[GC]

There are two screws securing it in the bottom, probably hidden by the carpet.

[NautiqueOasis]

I have a '13 200v and just replaced my blower; the 2 screws mounting the blower screw into the molded board in the transom. I secured both the top and bottom hoses with zip ties. I got my replacement blower from the dealer so it had the same electrical connection as the original blower (it was the same brand: Rule). I had a problem with an Attwood replacement blower that I replaced the original blower with last August; I kept getting a blower fault with my LINC system; Nautique thought the Attwood may be drawing different amps.

[dskier]

Found them. Thanks!! Under the carpet like you said. I will get another Rule like suggested......