Two Questions: bilge blower size and accessory breakers

[TWags]

Just a couple questions while I'm getting ready for some spring maintenance. I have a '97 Ski (GT40), and probably just a few weeks from getting things going - figured it was easier to ask here about these things than waiting those few weeks.

1. The bilge blower motor was getting very noisy last year, and it's time to replace it. It seems that either a 3" or 4" diameter motor is the most common out there at the parts stores, but wanted to see if anyone can confirm which size is needed for the '97 Ski. Just trying to get the parts ready for spring clean up.

2. I've also got a couple of accessory breakers that are a bit flakey. I'd love to get a few spare, but my searches on various web sites seem to be turning up dry. Any ideas out there? Maybe it's best just to order through the local boat shop?

Thanks,
TWags

[NautiqueJeff]

RE: Two Questions: bilge blower size and accessory breakers

Direct drive Nautiques use 3" and V-drives use 4". You can order your parts through White Lake by clicking the link at the top of this site. You'll get a 10% discount.

[Bob's2001]

RE: Two Questions: bilge blower size and accessory breakers

You can most likely get a blower at a local boat store for the same price or less and no shipping. I bought one last week for $24 and had it installed within an hour.