Tweet
Hi Guys in need of some help again i have put most of the heater into my 99 super sport and only have one thing left to do but are not sure , i have seen pics on here of people tapping into the manifold next to the dizzy i took out the temperature sender to put the T in but there in no room to turn the T as the fuel rail is in the way is there any where to tap in to for the hot water?
-
-
You probably need to download the engine manual for your own. But here was mine. So it will look something like this. If you are using the low idle wye, which i highly recommend you wont use the return in the pic.Attached Files -
-
Hi Scottb7 yep i have put the return thru the low idle wye thing but in your first pic where the plug is i have a temp sender there .the motor is a gt 40Comment
-
Can i tap into the tthermostat housing plug ? oh better check if my one has one of those.....Comment
-
and would the water still be as hot?Comment
-
When I spoke to heatercraft they also recommend the side of the block and to make a t with the knock sensor. You can see what you have there.Comment
-
ok will look into that too thanks scott.Comment
Comment