Was able to purchase for very low $$ the perfect pass stargazer module, display and GPS unit from a boat that had an engine fire and was being salvaged. GT-40 engine; same as my 1997 Ski.
At this time, I have no idea if the module and display unit are OK. Before I invest in the servo, servo cable and throttle cable, would like to confirm that the parts I have are working.
Does anyone know if you can power up (ie: apply 12 volts) to the module/display/GPS setup on a bench to do a basic power on validation WITHOUT the servo connected?
I'll post my progress here in the thread as I work though this.
Thanks in advance!
At this time, I have no idea if the module and display unit are OK. Before I invest in the servo, servo cable and throttle cable, would like to confirm that the parts I have are working.
Does anyone know if you can power up (ie: apply 12 volts) to the module/display/GPS setup on a bench to do a basic power on validation WITHOUT the servo connected?
I'll post my progress here in the thread as I work though this.
Thanks in advance!
Comment