Tweet
So last year my perfect pass was only reading zero. With some help here I can now get it where it would read but the calibration was still WAY off. When your going about 20 it reads about 2 (have to haul A$$ to get it engaged). I can calibrate it to get to about 12.5 @ twenty. Once I get it reading about 13 @ 20 it bugs out and goes back to not reading at all. It's seem like there is only so much room for calibration, I'm exceeding the limit and it resets itself. Any help?
-
-
Is the paddle wheel moving freely? last time I know anything like this a friend had hit the PP paddle wheel on the bunks, bent the roller so that it still rolled, but with much more required effort. -
Nuke hit what I would check first. Had this issue on a previous boat my paddle wheel was missing a fin,
Have you tried to hard reset the sytem? I Also had an issue prior to the fun issue in which pp would surge for no reason mid pull or completely disengage. Called pp and they ran me through few tests and determined it was the main module . Sent old one back and they sent me new one at a great price.
Pp is awesome to deal with. Owning zero off right now I much prefer perfect passComment
Comment