Streaming Leak Around Rudder Post - My Plan to Fix

[Vector]

I have a significant streaming leak at the bottom of my Nautique rudder post. The bilge runs about every two minutes so I have to fix this quickly. My plan is to loosen the top lock nut and then tighten the packing nut until the leak stops. I could really use advice on my plan and any other tips. I have attached a photo of the rudder shaft. I'm sweating bullets on this one. Thank you.

[Quinner]

Try tightening packing nut, if it is still leaking after that you may need to replace the packing.

[Quinner]

And it's no big deal, breaking the nuts loose could be a challenge though

[Paxdad]

Clean your bilge out while you are down there. Simple green works great.


Sent from my iPhone using PLANETNAUTIQUE mobile app

[shag]

If that is blower hose, needs to be re-mounted so it can effectively vent the bildge