Tweet
Just finished repairing a completely destroyed impeller and prepped my engine for salt.
Doused everything in wd40 yesterday and engine refused to crank. I then tried to cycle the throttle and return to neutral and voila. fired right up repeatedly.
Today, I installed a flush kit and coated everything with a thicker corrosion inhibitor that left a yellowish brownish waxy film. Its tested to resist salt corrosion better than anything else
NOW, the engine refuses to crank entirely. Pressing the button does nothing. I can hear a faint tiny little click under/behind the dash and nothing else
There IS a beep every 5-10 seconds or so. I cannot see any codes or warning messages. Everything else functions fine.
Where do I start checking?
Thank you
Doused everything in wd40 yesterday and engine refused to crank. I then tried to cycle the throttle and return to neutral and voila. fired right up repeatedly.
Today, I installed a flush kit and coated everything with a thicker corrosion inhibitor that left a yellowish brownish waxy film. Its tested to resist salt corrosion better than anything else
NOW, the engine refuses to crank entirely. Pressing the button does nothing. I can hear a faint tiny little click under/behind the dash and nothing else
There IS a beep every 5-10 seconds or so. I cannot see any codes or warning messages. Everything else functions fine.
Where do I start checking?
Thank you
Comment