Tweet
Hello
I'm working on a 2001 Bubble Back Nautique. The dash only has a 3 volt supply to it. Nothing works from the dash on the keypads.
Battery has 12.5 volts. Jumping at the solenoid will easily crank the engine over with 12 volts power. Cleaned the paint away from the engine ground and cleaned the cable ends.
Is there a way to open up the fusebox at the foot plate or are they totally sealed up?
I had tested the 3 volt supply at the connector to the start pad. lights did work but now faint on the keypad.
Battery is suppling 12.5 volts out of the main power cables.
Thanks for your replies.
I'm working on a 2001 Bubble Back Nautique. The dash only has a 3 volt supply to it. Nothing works from the dash on the keypads.
Battery has 12.5 volts. Jumping at the solenoid will easily crank the engine over with 12 volts power. Cleaned the paint away from the engine ground and cleaned the cable ends.
Is there a way to open up the fusebox at the foot plate or are they totally sealed up?
I had tested the 3 volt supply at the connector to the start pad. lights did work but now faint on the keypad.
Battery is suppling 12.5 volts out of the main power cables.
Thanks for your replies.
Comment