2016 G23 getting ready for winter

[DocPhil]

So here is my list for things to do before winter layup on the new G

1)change oil

2)check tranny and v drive fluid levels

3)add stabil to the tank and leave about 1/4 tank in the boat or whatever is left.

4)grease the rudder

5)winterize the motor dry block style

6)change the fuel filters

7)cover exhaust (mice)

8)clean, wash and wax the boat after the dealer is done with warranty work

9)disconnect and blow out heater hoses


QUESTIONS

1)with these new H6 motors, the blue plugs are simply removed and placed into the holder correct? Do they are fit in a specific spot or are they generic? Also, once the block holder is filled with plugs, I am winterized? Nothing else to do?

2)does anyone have the part numbers of the fuel filters?

3)anyone have a pic of which hose is the heater hose?

4)anything I am missing?

Thanks!


Doc

[NautiqueJeff]

Question 1. That's all I do. Some people put the plugs back and add RV anti freeze, but it really isn't necessary.

Question 3. They are the only RED lines. You can't miss them.

[goxc]

For what it's worth, my 200v manual says to winterize the boat with about 3/4 of a tank.

[DocPhil]

I found the part numbers of the fuel filters if anyone is interested.

Order a set from nautiqueparts.com