Tweet
The strainer in our boat isn't bolted down, although it does have a bracket. Someone must have moved it from the factory position. It's just being held up behind the ski pylon frame by the two hoses, and I can't see any open holes where it used to be mounted. Can someone with a '04 SANTE or similar vintage please take a picture of how the strainer was mounted at the factory? Thanks.
-
-
Not VDrives, but none of my CC's has had the strainer attached to anything except the two hoses. -
-
No picture for you but I used to own the same boat. There was a mount made of sheet metal that held it from the left side (looking rearward) by the area where one hose connected to the strainer. The hose passed through a hole in the sheet metal.Comment
-
Got an 04 SANTE, ours danglesComment
-
Ours was mounted to a bracket on the wall by the pylon
Sent from my SAMSUNG-SM-G930A using Tapatalk
Ian S
2014 SANTE. NSS. Pro balllast. Boatmate trailer
2004 SANTE. 4000 lb ballast, 2013 graphics (prev). Ramlin trailer
2009 Moomba Outback (prev). Boatmate trailerComment
Comment