Loss of power after using automatic bilge panel 06 210 super sport

[dabaker]

I have an 06 210 super sport. Twice this summer after switching the automatic bilge from all on to bilge pump on, then actuating the switch back to all on, we are unable to start the boat using the keyless ignition. After about 10 to 15 minutes the power eventually returns, and we are able start and return to normal operations. Has anyone else had a similar problem?

The wires are intact and tight, the bilge pump indicator light stays on, however no power to the ignition. I've read my manuals, and been unsuccessful in finding an wiring diagram, is there a relay or something that is starting to fail causing this? Any help would be greatly appreciated.

Thanks Jerry

[NautiqueJeff]

This should be the wiring diagram for that switch.

http://www.planetnautique.com/Correc...ETEConsole.pdf

I would bet the switch is starting to fail. You can order a replacement here:

http://www.nautiqueparts.com/switcha...lloff3way.aspx

[dabaker]

Thank you, I'll try the switch