Harmonic Balancer tourq spec GT-40

[Grant_West]

I was wondering if anyone knew what the tourqe spec for the harmonic balancer was on my GT-40 is

Im looking for the spec of the Large nut in the cent as well as the 4 smaller ones surrounding the pully

Thanks G

[gotpwr]

RE: Harmonic Balancer tourq spec GT-40

The center crank damper bolt torque spec is 90 ft-lbs. I couldn't find the torque spec for the pulley bolts, but they're not as critical, so just make sure they're "tight".

[Grant_West]

Thank You :grin:

[clayk]

you can just look for torque specs on 3/8" bolts , or just make them about as tight as as your alt. bolts

[farmerandy]

PCM service manual says 35-50 ft-lbs.