Wake shaper

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bandit628
    • Sep 2016
    • 318

    • Southern Illinois

    • Current-2012 SANTE 210 Past Boats 2000 Mastercraft
    #1

    Wake shaper



    I took off the wake shaper plate off my 210 to clean the metal plates (might be wrong name). The circles around the screw holes has some silicon stuff around them, I'm guessing this is squashed out 3m 5200 from the screw holes. But I could be wrong. Should I remove all this, or is this there on purpose so the metal plates does not scratch the fiberglass?
    Tags: None
  • lucky7t
    1,000 Post Club Member
    • Mar 2011
    • 1306

    • Oklahoma

    • 2015 SANTE
    #2
    Can you take a pic further out? I'm confused


    Sent from my iPad using PLT Nautique
    Current Correct Craft Boat
    [URL="http://tapatalk.imageshack.com/v2/15/02/05/1e6128564805861d2625d7b7f8efd2f1.jpg"]2015 SANTE 210[/URL]

    Correct Craft Boats Owned
    [URL="http://www.planetnautique.com/vb5/attachment.php?attachmentid=17771&d=1340117700"]2012 SANTE 210 (Boatmate Trailer)[/URL]
    [URL="http://www.planetnautique.com/vb5/attachment.php?attachmentid=14107&d=1313460568"]2003 SANTE 210 (Dorsey Trailer)[/URL]
    [URL="http://www.planetnautique.com/vb3/attachment.php?attachmentid=14108&d=1313461675"]2007 SANTE 210 (Magnum Trailer)[/URL]

    Comment

    • lucky7t
      1,000 Post Club Member
      • Mar 2011
      • 1306

      • Oklahoma

      • 2015 SANTE
      #3
      Can you take a pic further out? I'm confused


      Sent from my iPad using PLT Nautique
      Current Correct Craft Boat
      [URL="http://tapatalk.imageshack.com/v2/15/02/05/1e6128564805861d2625d7b7f8efd2f1.jpg"]2015 SANTE 210[/URL]

      Correct Craft Boats Owned
      [URL="http://www.planetnautique.com/vb5/attachment.php?attachmentid=17771&d=1340117700"]2012 SANTE 210 (Boatmate Trailer)[/URL]
      [URL="http://www.planetnautique.com/vb5/attachment.php?attachmentid=14107&d=1313460568"]2003 SANTE 210 (Dorsey Trailer)[/URL]
      [URL="http://www.planetnautique.com/vb3/attachment.php?attachmentid=14108&d=1313461675"]2007 SANTE 210 (Magnum Trailer)[/URL]

      Comment

      • bandit628
        • Sep 2016
        • 318

        • Southern Illinois

        • Current-2012 SANTE 210 Past Boats 2000 Mastercraft
        #4
        I will this weekend. This is in the middle bottom of the transom. This is where the plates attach that just slide up and down to change the shape of the wskeboard wake.

        Comment

        • ScooterMcgavin
          1,000 Post Club Member
          • Jul 2011
          • 1478

          • Florida

          • 2014 SAN 210 TE
          #5
          That's the hydro-gate and I think you are correct the sealant you are seeing looks like the marine sealant that they put in the holes before screwing the plate to the hull to seal up the holes from water intrusion. I could be wrong, but I'd probably take the old stuff off and squirt some new into the holes when your putting it back on. Just my .02
          Last edited by ScooterMcgavin; 01-18-2017, 12:39 PM.
          2009 Super Air Nautique 210 TE
          2006 Super Air Nautique 210 TE
          1989 Sport Nautique

          Comment

          • homer12
            Senior Member of PLANETNAUTIQUE
            • Feb 2016
            • 584

            • Indianapolis, IN

            • 2004 SV211 TE
            #6
            From what I know about the 3M stuff, that may have been 4200 as 5200 is supposed to be more permanent I think. Check both before reapplying but definitely clean up and put on new.


            Sent from my iPhone using PLT Nautique

            Comment

            • homer12
              Senior Member of PLANETNAUTIQUE
              • Feb 2016
              • 584

              • Indianapolis, IN

              • 2004 SV211 TE
              #7
              PS- how dirty were your hydrogate plates that you needed to clean them?


              Sent from my iPhone using PLT Nautique

              Comment

              • bandit628
                • Sep 2016
                • 318

                • Southern Illinois

                • Current-2012 SANTE 210 Past Boats 2000 Mastercraft
                #8
                ...sigh. I just bought the boat, cleaning it up really good before the season starts. The gates had bad scum on them it was hard to get off. Ended up using Mary Kates hull cleaner acid with steel wool, this worked great.

                Comment

                Previous template Next
                Working...
                X