Tweet
just got my new to me g21...and thought i would vent a little.
you ever try to change the impellers? you can't get to the 3 screws - even with a shorty screwdriver on one side cause all the thick bundled wires. you have to unmount the whole pump.
the fcc can't be drained easily cause the rudder cable goes right underneath it. had to create a special train pan to drain to take the center screw out to drain...before lowering it.
urrggg...any hints would be appreciated for next time...
scott
you ever try to change the impellers? you can't get to the 3 screws - even with a shorty screwdriver on one side cause all the thick bundled wires. you have to unmount the whole pump.
the fcc can't be drained easily cause the rudder cable goes right underneath it. had to create a special train pan to drain to take the center screw out to drain...before lowering it.
urrggg...any hints would be appreciated for next time...
scott