fitting perfectpass to a 03 210

[slim]

hi all
i'm fitting perfectpass to my boat and in the instuction the boat is ment to have the wire that go's from the pp computer to the servo motor.
but i carn't find it. anyone know where it's hiding???
i hope it's there cos they never sent me one in the kit and i'll have to wait another 2 weeks

cheers
slim

[Laptom]

RE: fitting perfectpass to a 03 210

I think you have to wait for another 2 weeks. Sorry, but the wire between the servo and PP mastermodule should be included within the kit and it's nowhere in the boat for sure.

Contact PP and ask them to send them with priority. It should be delivered everywhere in the world within 48hours.

[BMiller]

RE: fitting perfectpass to a 03 210

I just did my 03 SAN and the wire from the servo to the perfect pass should be included in the kit. This should be a long gray wire with two connection points at the servo.

I think the instructions say the extra wires you need from the paddle wheel to perfect pass are already installed by correct craft. These can be found under the dash. Just follow these from the existing speedometer.

Brian

[slim]

well i guess they will hav to send me one then.
cheers for the help
slim

[derby]

How fancy is the connector?

Why not just go buy some wire. Shoot you could even cut and crimp new connectors.

Just a thought to save you 2 weeks.

[slim]

i had a look at doing that but i put it in the to hard basket.
i'll just wait for one ot come

slim