Help identify which OJ prop I have

[99SAN]

I removed my prop and i cant find any information on it besides being a 14x18.
It's stamped behind the nut OJ 14 18P CUP 1 1/8. Here are some pictures of the numbers on the blades.

[99SAN]

Also, I have a older xpc dripless shaft seal and need the sealing rings. Where can I buy them?

Sent from my SM-G930V using PLT Nautique mobile app

[99SAN]

Anyone?

Sent from my SM-G930V using PLT Nautique mobile app

[xlair]

You basically identified the prop correctly. 14x18" 1 1/8" RH 4 blade OJ propeller. There are better props out there, depending on what you are doing.

Is this what you need for the shaft ?
http://www.shaftseal.com/en/categories/300000116


Sent from my iPhone using PLT Nautique

[99SAN]

.

[99SAN]

You basically identified the prop correctly. 14x18" 1 1/8" RH 4 blade OJ propeller. There are better props out there, depending on what you are doing.

Is this what you need for the shaft ?
http://www.shaftseal.com/en/categories/300000116


Sent from my iPhone using PLT Nautique

Oh ok, i was thinking there was a number associated with the prop like acme. What is a better prop for better fuel mileage and wakeboarding/surfing? I need the 2 piece seal inside the aluminum housing. Maybe gortex?

Sent from my SM-G930V using PLT Nautique mobile app

[xlair]

Give acme a call about props. They will give you good advice.


Sent from my iPhone using PLT Nautique

[Evening Shade]

You can also call OJ and they can give good advice as well. Eric Johnson at OJ is very knowledgeable about inboard props.