2014 SAN 210 porpoising when wakeboarding

[SuperAirHokie]

Having a problem with porpoising when I wakeboard. Riding with stock ballast full (on Pro setting). Primarily happens if only a driver in the boat. Slight to nominal chop will cause it.

Anyone else have same experience? Recommendations?

[charlesml3]

Sounds like you have too much weight in the back.

-Charles

[jondavis08]

Need bow weight. Either people or a sac/lead. On my 2014 210 I ordered a piggy back kit from wakemakers and a under the seat bow sac(500). I ride with it full but I also have 850s in place of the original pro ballast so in need all the bow weight. It's a real easy install


Sent from my iPhone using PLT Nautique

[SuperAirHokie]

Thanks to you both. I will start with more weightt in the front and then upgrade ballast.

Jon - I think I just delinquently responded to you on another chain. I have not been on here in a while. Nautique was familiar with the issue.

[lucky7t]

Let out a little in rear . You will hardly notice the wake change


Sent from my iPad using Tapatalk

[swatguy]

Two options , let little out of the rear, or add more to the bow.


I cote option 2. Add more to the bow. 350 is a good start

[SuperAirHokie]

Thx Lucky & Swat. Going to look into ballast upgrade all around.