nautique linc depth finder

[agouge888]

Is there a way to change depth settings in the Linc System? In my 2012 210 and '15 G23...it looks like max depth will only go to 100ft. Any suggestion? Thanks

agouge888

[toomuchuv]

Limit of the transducer. My 2010 used to go to 200' but my '14 is the same as yours....100'.


Sent from my iPad using PLT Nautique

[Tallredrider]

I thought it would be nice to know how deep the water is in the deeper lakes I frequent, but then I realized it is a very trivial piece of knowledge. I only use the top several feet of the water anyway.

My Malibu went to 400 feet...Just sayin'.

[Longhorn1186]

We have a 2017 G23 and I have seen greater than 100 on quite a few occasions on Lake Travis in Austin.

[agouge888]

I just figured They would have gone at least '200 if not '300ft. Max ....Most of the lakes here in the south east that we are on are max depths of 175' to 265' and it would be interesting and useful to see where these areas are. Just thought there might be an upgrade, update, etc to be able to change it. As Tailrider said...we mostly use the top few feet of water anyway, but his Malibu was able to go to '400 ft. Let me know if u guys find a cure.

thanks,

agouge888

[toomuchuv]

Only "cure" is to change transducer. Read the top of it.. I bet it says 100'