Tweet
Anyone having problem with their spinner racks besides me? My spinner racks were great when they were new but now they seem to be failing. There is something going on inside the spinner part that is causing them to slip and now when the boards are sitting on the racks, the tail ends of the boards are in the boat which is a big safety issue. This is happening to both of them, so I know it's not an isolated issue.
-
-
Here's a few pictures. If you look at the first picture, the inside of the spinner has a big gap on the left side and it is rubbing on the right side. The second picute is taken at a 90 degree agle of the tower. Now if you can picture boards sitting on the spinner, the tip of the boards are inside the boat and my kids are hitting their heads on boards. It's not that the pin is in the wrong hole, something is slowly slipping on the inside of the spinner that is causing it to shift. -
Looks like they're broke. I talked to somebody who has personally had to assemble the spinners and there is a whole lot of things going on inside such that he had to go to Titan in order to get full instructions on how to assemble them. I think you're probably due for a dealer visit on this one.
ChrisComment
-
there was a recall update for these. Were they done on yours?Comment
-
Not that I'm aware of. I'm thinking of getting some flight clips. They are nice, but the reliability of the flight clips is more attractive to me at this point.Comment
-
Take your boat to your dealer and have him look at them to see if the service update on the racks have been performed.Comment
-
Our spinners did the same thing cc should be able to hook you up with the replacement parts under waranteeComment
Comment