GT40 HEATER CONNECTIONS

[tommyb]

HAS ANYBODY GOT A PICTURE OF WHERE TO CONNECT THE HEATER PIPES ON A GT40? 02 SAN
THE WALTHROUGH INSTALL POST IS GREAT BUT NOT MY MOTOR
ANY HELP PLEASE.

[jhiestand]

I don't have any pix here on my work machine but connections for your motor are at the top where the thermostat is and the bottom of the engine where one of the block drains is located. To make the job simple, you need a 45degree fitting to clear the fuel injection rails. Check out the below thread.

http://www.planetnautique.com/index....ht=heater+gt40

If you still have problems, I can prolly score some pix at home.

[richard]

GT-40 Heater connection

The pic shows one ocnnection of the heater hose,unfortune don't have other side.

[wake_fun]

RE: GT-40 Heater connection

Look in my gallery

[AirJeff]

RE: GT-40 Heater connection

What would happen if you hooked up one hose to the elbow on the engine water pump?(not raw water) Would that fix the low speed heat issue? And then where would you plug the other hose into? I know I can get the low speed fix, just wondering if it's really needed.