2000 pro air nautique ballast replacement

[Puckett441]

I知 replacing hard ballasts in my nautique, one had a crack in it and was leaking.
I pull the fuel tank, and hard tank and cleaned and replaced all ballast and bilge hoses. Check and replaced anything that was worn or broken.
Ballast bags will be here this week..
If anyone has any input or pictures that has already did this project would love to see them


Sent from my iPhone using PLT Nautique

[glassywaters]

Recently completed this project. Are you adding reversible pumps/switches for the ballast bags? I would recommend bracing the rear floor trunk panel with something if you are running any significant weight in the back. The panel can bow down and push on exhaust hose.

[Puckett441]

I知 not running the reversible pump, I still want to use the switch in the dash.
Do you have any pictures of your install?
Or any on the bracing in the rear compartment?
Any help would be greatly appreciated..
I知 going with the 2 400lbs bags in the back..


Sent from my iPhone using PLT Nautique

[glassywaters]

Here are a few links that helped me with my install.

https://www.planetnautique.com/vb5/f...hlight=ballast

https://www.planetnautique.com/vb5/f...ir-nautique-dd

[Puckett441]

Here are a few links that helped me with my install.

https://www.planetnautique.com/vb5/f...hlight=ballast

https://www.planetnautique.com/vb5/f...ir-nautique-dd

Thank you,


Sent from my iPhone using PLT Nautique