Phender Pro on Gen 1 230

[Blamey]

I bought 4 phender pros on the Black Friday sale and want to install them on my 2009 230.

I was wondering if anyone has recommended locations.

It seems most installs have them on the top deck (as opposed to the side).

For the front to I am planning on installing just in front of the windshield.

For the rear two there seem to be a few options, not sure what location would be best.

Sent from my Pixel XL using Tapatalk

[GMLIII]

Although I have a G23. I would still recommend installing 3 per side vs 2. One just above windshield ,
mid area then near stern.

[charlesml3]

Yep. Three per side. I have one about middle of the side windshield. Another just a bit behind where the tower lands on the gunwale and a third at the back. A bunch of photos in the link below. Note that these photos don't show the middle one since I hadn't installed it yet. Need to get new photos...

https://imgur.com/a/8bQjW

[Blamey]

Blurg, I bought the 1/2" size and they don't appear to be for sale anymore. Guess I'll need to switch to the 3/8 for the third pair.

I also didn't get pins when I bought the first two pairs as I wanted to add Nautique Pins, do you know what size the standard Nautique pins are?

[charlesml3]

Blurg, I bought the 1/2" size and they don't appear to be for sale anymore. Guess I'll need to switch to the 3/8 for the third pair.

I also didn't get pins when I bought the first two pairs as I wanted to add Nautique Pins, do you know what size the standard Nautique pins are?

3/8" They don't put any 1/2" size on any Nautiques.

[Blamey]

3/8" They don't put any 1/2" size on any Nautiques.

****, Should've done my homework.

Looks like parts for the 1/2" are rare and would be cheaper to just get a new set of 3/8".