The steering on my 03 196 has gotten really bad. I am planning to replace the steering cable but have had a hard time finding directions on how to do so for this model boat.
My current understanding is that the rudder side of the old one is detached, then the steering side is detached, the rudder side gets a rope tied to it and pulled through to the front, then the new one is attached to the rope and pulled through and then hooked up on both sides. I am wondering what all needs to be taken apart as far as the boat is concerned for this project. Also just general directions on the steps of how to complete this project.
I would really appreciate any directions, tips, etc.! Especially if there are any peculiarities with this model 196 in particular. Thank you!
My current understanding is that the rudder side of the old one is detached, then the steering side is detached, the rudder side gets a rope tied to it and pulled through to the front, then the new one is attached to the rope and pulled through and then hooked up on both sides. I am wondering what all needs to be taken apart as far as the boat is concerned for this project. Also just general directions on the steps of how to complete this project.
I would really appreciate any directions, tips, etc.! Especially if there are any peculiarities with this model 196 in particular. Thank you!
Comment