Warning Closed-loop gasoline bank1 low

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Maverick797
    • Jun 2018
    • 2

    • North Carolina

    • ‘13 SAN G23 550

    #1

    Warning Closed-loop gasoline bank1 low

    This warning popped up this evening:
    “DTC 1156: Closed-loop gasoline bank1 low”
    but cant find much info on it anywhere. From what I can find, sounds like a sensor issue? Anyone else had this warning? What does it mean? Do I need to take it to the dealer immediately, or can I shut her down and try again tomorrow?
    2013 SAN G23 550XS
  • rsess
    • Nov 2010
    • 48

    • toronto

    • 2017 G23

    #2
    I get that too. Same engine. Don’t know what it is either

    Comment

    • Maverick797
      • Jun 2018
      • 2

      • North Carolina

      • ‘13 SAN G23 550

      #3
      Now I got a DTC 172 Adaptive Learn Gasoline Bank 1 Low

      Comment

      • ironj32
        Senior Member of PLANETNAUTIQUE
        • May 2011
        • 601

        • Lake Sarah (Independence), MN

        • 2018 SAN G23 XR550

        #4
        Most likely your O2 sensors.
        2018 SAN G23 XR550
        2015 SAN G23 XR550
        2014 SAN G23 XR550
        2013 SAN G23 XS550
        2013 SAN G23 ZR450
        2011 SAN 230
        2010 SAN 230
        2000 XStar
        www.mnspringride.com

        Comment

        • Infinity
          Senior Member of PLANETNAUTIQUE
          • Sep 2017
          • 730

          • Lake Norman - Denver, NC

          • 2014 SV244 w/ ZR409

          #5
          x2, think that is O2 sensor.

          Comment

          • Mahnal
            • Apr 2019
            • 92

            • Bowling Green, KY

            • 2014 SAN G25 - 550

            #6
            Originally posted by Maverick797 View Post
            Now I got a DTC 172 Adaptive Learn Gasoline Bank 1 Low
            Maverick797 - How did you fix this. I just got this error today on the same engine?

            Comment

            • Paul W
              • Oct 2010
              • 45

              • Lower Fox River IL

              • 2017 SAN230 Coastal Edition

              #7
              I used to get this code all the time. So I changed all O2 sensors and still got the code once after the change.
              I then changed the plugs, fuel filter, fuel oil and water separator and no more codes for a month or so... Not sure if I got it solved completely but so far so good. Check all the seals around the top of the engine, and into cats could be a leak? Check all the wires to the O2 sensors to make sure there good not burnt?

              Comment

              • Paul W
                • Oct 2010
                • 45

                • Lower Fox River IL

                • 2017 SAN230 Coastal Edition

                #8
                Mine is a PCM H5 direct injection engine

                Comment

                Working...
                X