Tweet
We just took the boat out yesterday for the first time. I don't believe that the NSS wake plates are working. I have tried to activate them in the driveway, on the trailer, and they aren't moving. What am I doing wrong to check them on the trailer? Maybe they aren't working. Any help will be greatly appreciated.
-
-
I don't have an NSS boat, but don't you have to be going a certain speed before they'll deploy? With that, I don't think you can deploy them on the trailer.
Sent from my G3423 using Tapatalk
-
I don't think they will deploy out of the water. You can have someone watch while going about 10 and see if they come out... They only extend out about 1 - 1 1/2" when operating, and should retract at about 15 I think.
Comment
-
The plates will not work unless the boat is moving at least 5 mph. Make sure the NSS and speed control are turned on.2009 Super Air Nautique 210 TE
2006 Super Air Nautique 210 TE
1989 Sport NautiqueComment
-
I do believe the go out and in when you first touch the key. But yes you have to be moving . You should see a difference . Go to the line screen and select surf and make sure nss is on
Sent from my iPad using TapatalkCurrent Correct Craft Boat
[URL="http://tapatalk.imageshack.com/v2/15/02/05/1e6128564805861d2625d7b7f8efd2f1.jpg"]2015 SANTE 210[/URL]
Correct Craft Boats Owned
[URL="http://www.planetnautique.com/vb5/attachment.php?attachmentid=17771&d=1340117700"]2012 SANTE 210 (Boatmate Trailer)[/URL]
[URL="http://www.planetnautique.com/vb5/attachment.php?attachmentid=14107&d=1313460568"]2003 SANTE 210 (Dorsey Trailer)[/URL]
[URL="http://www.planetnautique.com/vb3/attachment.php?attachmentid=14108&d=1313461675"]2007 SANTE 210 (Magnum Trailer)[/URL]Comment
Comment