Fault Code reset by Diacom computer

[Pbmci@shaw.ca]

I forgot to plug in the knock sensor wire back in after de-winterizing. I now need to reset the Knock Sensor code. Disconnecting battery and all does not work.
I have a 2005 Nautique 196, 330hp Excalibur engine, is it possible to purchase the Diacom software as I am a ferry ride and 5 hour drive from a PCM dealer.?
Or does anyone have a trick to resetting the ECM codes?

[NautiqueJeff]

You can buy it, but it isn't cheap.

http://www.rinda.com/marine/

[homer12]

Search for the CodeMate by Diacom. It’s about $50 and can reset and read your basic codes.


Sent from my iPhone using PLT Nautique

[obd666]

Search for the CodeMate by Diacom. It’s about $50 and can reset and read your basic codes.

yep, is easiest way to go. have used it to clear that very code before ...

[scottb7]

Love the idea, but not sure what year the above tool goes up to....
CodeMate
MEFI Code Reader

For GM-Delphi MEFI-1 thru MEFI-4

This pocket size tester serves as both an EFI Problem Indicator and a Spark Timing service tool. It is the perfect tool for low volume marine repair shops that troubleshoot a small number of EFI systems a year. CodeMate allows fault codes to be read and allows base spark advance to be set when used with a timing light.

For GM-Delphi MEFI-1 thru MEFI-4
systems only. Not compatible with
MEFI-5 and above or 2001 and newer
MerCruiser PCM-555 / ECM-555.

[vanhanbr]

I think Nautique switched to Econtrols ecm's in 2008.

[jkallen21]

The codemate goes up through most 2006 models

[rdugedug1]

Has anyone tried this from Fox Marine for resetting the cel? At $315 its cheaper than the techmate but not sure if its the right device for the job.

ECM-07/08 Engine Gateway (temporarily delayed) (fox-marine.com)

Also, I have a 2009 SAN 210 with the 343. I believe it has the ECM-07, can anyone confirm that?

Low oil pressure light came on many years ago and never resets. I was going to take it to a dealer last year to reset but at spring startup (after end of season oil change) the code was triggered again. I don't want a $100 charge every time the light comes on. I am tired of the red light being on on my dash.

Thanks