I have a 2012 210 Byerly edition. There is a very obviously line of oxidation or something around the boat.
The Boat was kept on a hoist its whole life, so not sure how it has happened in 5 years.
Anyhow, a local fiberglass/boat repair placed tried to do a test spot under the swim platform with no change. They used 320, 600, 800, 1000, 1500, 2000. They stated that if they went with anything below 320 it might hit the flake.
Any ideas?
The Boat was kept on a hoist its whole life, so not sure how it has happened in 5 years.
Anyhow, a local fiberglass/boat repair placed tried to do a test spot under the swim platform with no change. They used 320, 600, 800, 1000, 1500, 2000. They stated that if they went with anything below 320 it might hit the flake.
Any ideas?
Comment