Tweet
my bolts that hold the sliding rails to the black riser are loose---i tried to tighted them, but they need to be backed up? there is no access to the underside of the black riser---
anyboady know a trick?
anyboady know a trick?
-
2008 SANTE 220 (current)
2004 SANTE 210 (gone)
1998 BAJA 252(gone)
1998 MALUBU WAKESETTER LX(gone)
2000 CARLSON (gone)
1992 MC MARISTAR 240 (gone)
1994 GLASTRON 175 (gone) -
RE: seat bolts--02 SAN
i meant 042008 SANTE 220 (current)
2004 SANTE 210 (gone)
1998 BAJA 252(gone)
1998 MALUBU WAKESETTER LX(gone)
2000 CARLSON (gone)
1992 MC MARISTAR 240 (gone)
1994 GLASTRON 175 (gone) -
RE: seat bolts--02 SAN
top2008 SANTE 220 (current)
2004 SANTE 210 (gone)
1998 BAJA 252(gone)
1998 MALUBU WAKESETTER LX(gone)
2000 CARLSON (gone)
1992 MC MARISTAR 240 (gone)
1994 GLASTRON 175 (gone)Comment
-
RE: seat bolts--02 SAN
Im guessing you will have to remove teh riser fro mthe floor, then hold a wrench on them to tihten. There are probably like 20 screws or something that hold it to the floor.Comment
-
RE: seat bolts--02 SAN
I had the same problem on my '03. I used a large flatblade screwdriver to stick into the end of the slider and keep the lower nut from moving. That held enough for me to get the nuts loose. good luckComment
Comment