2018 SAN 210 heater install help

[Dewey_L]

I’m about to venture on a heater install on my 210, just curious if anyone has pictures of where the factory location of the heater core is, and If I need a circulation pump and where I should put it? Any advice is welcome.. lol. I have the ZR4 motor btw.

Thanks in advance




Sent from my iPhone using PLT Nautique

[charlesml3]

Here you go:

https://imgur.com/a/YVVRNPC

The core mounts under the dash. Access is from the bow. Pull off the seat back cushion that's in the bow on the driver's side. The core mounts flat against that white panel.

The circulation pump is optional. It'll keep the heat warm longer while the engine is off.

-Charles

[Dewey_L]

Here you go:

https://imgur.com/a/YVVRNPC

The core mounts under the dash. Access is from the bow. Pull off the seat back cushion that's in the bow on the driver's side. The core mounts flat against that white panel.

The circulation pump is optional. It'll keep the heat warm longer while the engine is off.

-Charles

Thank you, that’s exactly what I was looking for.


Sent from my iPhone using PLT Nautique

[ducatidesmo]

Here you go:

https://imgur.com/a/YVVRNPC

The core mounts under the dash. Access is from the bow. Pull off the seat back cushion that's in the bow on the driver's side. The core mounts flat against that white panel.

The circulation pump is optional. It'll keep the heat warm longer while the engine is off.

-Charles

Hey Charles,

how fragile are the fasteners that hold the seat back cushion. Trying to get to the electrical, but scared to break off the fasteners.

-Derrick

[charlesml3]

Hey Charles,

how fragile are the fasteners that hold the seat back cushion. Trying to get to the electrical, but scared to break off the fasteners.

-Derrick

Oh you're going to break a few. No way around it.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

-Charles

[ducatidesmo]

Thank you sir. good to know its just a push fastener on both sides.