How to remove bow seat back cushion on a 210?

[ally505]

Hi, how do I go about removing the bow seat back cushion on an 07+ 210? Is it bolted on or just held with fasteners?

I need to replace the bow eye so hoping there is access to replace this from behind the seat back?

[swatguy]

It it’s just Xmas tree tabs. Can’t recall if there are 5 or 6. Pop those loose , and there is a J-Bar hook that locks it next to the fiberglass ...... you’ll need to slide the seat back down and around to get those to disengage

[ally505]

Thanks!

[bandit628]

Removing that seat won't help you get to the bow eye. There is no access hole if I remember right. That's how my 2012 210 is.
You just have to reach up under the bottom seat.

I replaced my bow eye for a longer one, to work with my ramp n clamp.

Sent from my SM-G955U using Tapatalk

[bandit628]

https://www.walmart.com/ip/7PCS-Car-...AaAmxHEALw_wcB

These can help removing seat backs though.

Sent from my SM-G955U using Tapatalk

[ally505]

Thanks guys, I have similar tools so will have a pop at this over the weekend. Fitting a Ramp n clamp too as I don’t like the bump stops and lack of winch on my ramlin trailer.