Tweet
Hey guys, new member to the forums as I’m finally planning to get my own Nautique.
My buddies have been die hard Nautique fans for quite a while with various boats from 210s, 220s, 230s, and g21s. I’m familiar with these forums and have done some prior searches on this topic thanks to their referrals.
I’ve seen various posts about tower clearance while on trailers (for 07-09 230s/236s). However, no posts allow me to figure out tower clearance for these models while the boat is in the water.
I live in a cove where I need to go under a bridge to access the main lake. When the lake is at full pond clearance is around 7-8’. It’s just me and my fiancé so I’d like to see if I can get away with purchasing an older 230/236 with these tower types and not have to raise/lower the tower every time we go out.
I’m curious to find the fct2 tower clearances for 2007-2009 236/230s with the titan tower as well as the standard tower while the boat is in the water. Can anyone chime in on this, Or at least point me to where I can find dimensions for total boat height (boat + tower) so I can subtract the draft and get a good in water clearance figure from that calculation?
Sent from my iPhone using PLT Nautique
My buddies have been die hard Nautique fans for quite a while with various boats from 210s, 220s, 230s, and g21s. I’m familiar with these forums and have done some prior searches on this topic thanks to their referrals.
I’ve seen various posts about tower clearance while on trailers (for 07-09 230s/236s). However, no posts allow me to figure out tower clearance for these models while the boat is in the water.
I live in a cove where I need to go under a bridge to access the main lake. When the lake is at full pond clearance is around 7-8’. It’s just me and my fiancé so I’d like to see if I can get away with purchasing an older 230/236 with these tower types and not have to raise/lower the tower every time we go out.
I’m curious to find the fct2 tower clearances for 2007-2009 236/230s with the titan tower as well as the standard tower while the boat is in the water. Can anyone chime in on this, Or at least point me to where I can find dimensions for total boat height (boat + tower) so I can subtract the draft and get a good in water clearance figure from that calculation?
Sent from my iPhone using PLT Nautique
Comment