SeaDek Transom Protector for 2019 SAN 230

[paticus]

The G23 has the option (or maybe it's standard) to add some strips of seadeck on the transom, which runs along the swim platform. This seems great for preventing wakeboards from smacking against the transom and chipping the gelcoat.

Newbies and kids are especially not careful about their board when on the platform, and I hate being high strung about them on platform.

I don't see this option on the 230, does anybody know how to source seadeck for the 230 transom? I'm guessing I need to send dimensions to seadeck and get it cut, but was curious if anybody has any off-the-shelf solutions (or pre-made template drawings).

[TNRIDER]

I bet you could order these and just cut down the middle section on each edge if it was too wide. Or get them one for the G21?

[Michigan210]

Let us know what you find, I'd love to add the same thing to my '18 210

[brit_hunsicker]

Hit up Derek. He is great to work with. He can make you anything you want with measurements or you might get lucky and he may be have the file if SeaDek has this template on file. From my experiance, Derek is much easier and faster to work with than SeaDek direct.