I'm in the process of restoring a 2000 SAN with a python 502. The original wiring harness was compromised before I bought it and I'm working through some issues.. From what I can figure out as the keypads stopped working, the guy who had it began wiring up toggle switches using the harness and main power block on the engine.. Finally got all of that mess sorted out and the engine is running.. However, I have some questions:
1. The right key pad has power but is showing red on all of the different accessory keys, nothing will work on that key pad when I press. What could be the issue here?
2. Does anyone have a engine wiring diagram? I have a few items that I need to get back online such as the engine hatch motor.. Cannot find anything for the 502?
Any help is much appreciated.. I would love to find someone out there with the same boat and 502 to share pics.. I've been looking at everything I can find online to make sure to restore the boat back to original..!!
Thanks in advance for the help!!
1. The right key pad has power but is showing red on all of the different accessory keys, nothing will work on that key pad when I press. What could be the issue here?
2. Does anyone have a engine wiring diagram? I have a few items that I need to get back online such as the engine hatch motor.. Cannot find anything for the 502?
Any help is much appreciated.. I would love to find someone out there with the same boat and 502 to share pics.. I've been looking at everything I can find online to make sure to restore the boat back to original..!!
Thanks in advance for the help!!
Comment