Sherwood F75 water pump

[Davis-75]

We have a 1975 Ski Nautiuqe purchased new, The Sherwood F75 water pump has worked beautifully for 45 years and has finally fallen apart. I have had no luck finding a replacement, alternative, or rebuild kit. It seems to be in good order, except for the bearings and seals. I do have a poor drawing of the unit but no idea where to start???

Looking for any information on how to move forward??

[gary s]

With Correct Craft Fan being down at this time your choices are limited. You could contact Pump Vendor or Depco Pump and check with them. Bearings can always be cross referenced and many times seals are the same across the line. I'm guessing your powered by a Palmer?

[mpost]

I have a maintenance and repair manual that I downloaded from Sherwood. The only mention for a F75 is for a Escort 302 and 351 but does list bearings, impellers # etc. You could try searching for it and look into it. If you cant find it PM me and I could e-mail it to you. Maybe Sherwood still carries the parts???

[Davis-75]

Yes - this is an Escort 351.

I do have an old hand drawing with old part numbers for the pump. I started with Sherwood but got nowhere. Its been discontinued for so long nobody there knew where to look

Thanks

[gary s]

That did it- knowing what engine helped. Pump vendor shows them,Sherwood 10927 is the seal, Sherwood 4257 is the bearings. Prices are all over depending where you look

[Skidave]

Call Vince at Discount Inboard Marine. He will know or have an adequate replacement for you.

Sent from my SM-J337V using Tapatalk

[Davis-75]

Thanks everybody - we are back on the water.

I had to source the bearings, seals, and a few other parts from several of the sources you all recommended. I also ended up having to have a new shaft cut at a local machine shop.