I have installed the Mallory Distributor Protec Conversion Kit on a 93 SN HO GT-40 heads. Kit is installed and wired per the diagrams and I tried to trouble shoot with this thread https://www.planetnautique.com/vb5/f...ronic-ignition but my wiring is correct. Also noticed when disconnecting the Protec wire 30 (pin F on the ems plug) which is the oil pressure and water temp switch is spliced and a wired back to the dash. Any idea what this is wired to?
My main issue is that I have 12v @ the coil but I am not getting any spark. Any help is appreciated.
My main issue is that I have 12v @ the coil but I am not getting any spark. Any help is appreciated.
Comment