Windshield restoration

[clstinson67]

So took my windshield off my 03 SAN and man was it a pain to get the frame disassembled. The screws were like corroded to the frame and wound up striping the screw heads on most of them and had to cut them off, but finally got it all apart.

I should be able to reuse most of the gaskets like the screw cover gasket, but my question is what is the part number or where to buy the gasket that goes on the bottom of the frame that attaches to the deck of the boat? Seems like it has adhesive on it.
Here are 2 pics of it, don't think I can reuse it can I?

[NautiqueJeff]

Here you go.

https://www.nautiqueparts.com/produc...8-foot-pieces/

[clstinson67]

Thanks Jeff, I saw that but just wanted to make sure before I ordered it.

Chris

[NautiqueJeff]

Yep, that's the one. It has adhesive on one side with a peel-and-stick backing.

Use our discount code (PND) for 10% off your order.

[clstinson67]

Thanks.

Any advice for putting back together once I get the frames back from powdercoat? Like bottom or top first then side?

[NautiqueJeff]

Mine have always gone back together pretty easily. No real trick to it.

[clstinson67]

Jeff - having a hard time finding the small screws that are used to put the frame together. Looks like they are 10 x 3/8" long and black, was only able to save 3 of them. Any ideas of what I can do?

I did contact the local dealer to find the windshield part number so I can call Taylormade to see if they have some.

[NautiqueJeff]

I have been lucky that I have never had to replace any of those. I don't have a source for you.

[havoc]

McmasterCarr and paint head black


18-8 Stainless Steel Oval Head Screws for Sheet Metal



Number 10 Size, 3/8" Long











Undercut Profile







Packs of 100









Delivers tomorrow 5-7 pm
$7.17 per pack of 100

90315A495

[clstinson67]

thanks havoc, I was able to get them from Taylormade.

[clstinson67]

Forgot to add pics of the windshield back on and tinted.